1 / 20Specs
Class
NASA · Spec Miata
Year
1999
Condition
Race ready
Mileage
3.8K miles
Car
- Year
- 1999
- Make
- Mazda
- Model
- MX-5 Miata
Racing
- Discipline
- Road Racing
- Sanctioning body
- NASA
- Class
- Spec Miata
Powertrain
- Engine
- Rossini 1999 Spec Miata engine, about 38 hours; dyno and leakdown info for serious buyers
- Transmission
- Planet Miata transmission, about 38 hours, new pilot and clutch release bearings
Safety
- Cage
- Planet Miata cage
Electronics & extras
- Spares package
- Complete spare engine, transmission, driveshaft, exhaust, front and rear subframe assemblies, extra uprights and hubs, control arms, brake and suspension parts, fuel pumps, harnesses
Condition
- Mileage
- 3.8K miles
Other
- body
- Original body panels and bumpers with VIN tags; green vinyl wrap with orange and white graphics
- hours
- 38
- brakes
- Planet Miata calipers (about 3 weekends), G-LOC pads (about 1.5 weekends), replaced brake lines
- safety
- OMP HTE-R 400 seat (new for 2026), harness recertified 2026, Lifeline electronic fire suppression, electronic master kill switch, cool suit system
- history
- Seven race weekends, no on-track contact; roller is former Planet Miata car that rolled at Sebring
- drivetrain
- Planet Miata rear differential
- suspension
- Penske dampers rebuilt by Penske in 2026; powder-coated subframes and control arms; offset front upper arms; MiataHub thick rear hubs
- electronics
- AiM MXS 1.3 dash and SmartyCam 3; logs AFR, oil and fuel pressure, coolant and intake temps, throttle, brake pressure; tire pressure monitoring
- wheels_tires
- Four complete race wheel and tire sets plus stock wheels on roller; used race tires about 4-6 heat cycles
Ask the seller
This listing doesn't say these yet. Get answers before you make an offer.
- Logbook: Which club logbooks does it have, and when did it last pass annual tech?
- Engine hours / races: Who built the engine, and how many hours or race weekends since the last refresh?
- Seat expires: What's the date on the seat's certification label?
- Belts expire: What's the date on the belt labels?
- Fuel cell expires: Is there a fuel cell, and what's the date on the bladder?
- Fire system: What fire system is fitted, and when was it last serviced?
More in how to buy a used race car and safety equipment expiration dates.
Description
1999 Spec Miata #132 with extensive spares and a second roller
Asking $49,500 for the complete package. Located in Candor, NY. I’m selling the car and spares together.
I built this car specifically for the 2026 NASA Championships and have really enjoyed racing it. I’m considering moving on to other priorities in life, so I’m putting the complete package up for sale. I don’t need to sell it and am happy to keep it if the right buyer doesn’t come along.
Planet Miata had caged the 1999 chassis for a new Spec Miata build, but the original customer did not finish the project. I bought it, stripped it to a bare chassis, and completed the build. The car has seven race weekends on it, with no on-track contact. The Rossini engine and Planet Miata transmission each have approximately 38 hours. The car also just got a clean bill of health from Mike Rossini on my way down to champs in September, making even more power now than when the motor was installed in April.
The car
Chassis and body:
• Planet Miata cage
• Original body panels and bumpers, all with VIN tags still present
• Minor quarter-panel dent from before I bought the chassis was repaired before the build
• Underside cleaned and painted black
• Interior and engine bay cleaned and painted gray, including the inner surfaces of the body panels
• Green vinyl wrap with orange and white graphics over the green
• Clean, crack-free dash and very little wear inside the car
Engine and drivetrain:
• Rossini Racing Products 1999 Spec Miata engine
• Dyno and leakdown information available to serious buyers
• Planet Miata transmission with new pilot and clutch release bearings fitted when installed
• Planet Miata rear differential
• Mazda Motorsports competition motor mounts
• Mazda Motorsports exhaust
• ESR radiator
• Dfuser Motorsports engine and injector harnesses
• Fuel pump and fuel filter replaced during the build
• Green Filter air filter w/ a spare
Suspension, steering, and brakes:
• New powder-coated front and rear subframes
• New powder-coated control arms, suspension bushings, and ball joints
• Offset bushings in the front upper control arms for camber adjustment
• Penske dampers rebuilt by Penske at the beginning of the 2026 season
• Factory Mazda manual steering rack with R-package tie rod ends
• MiataHub thick rear hubs
• Front and rear wheel bearings with about two race weekends on them
• Planet Miata front and rear calipers with about three race weekends on them
• Replaced brake lines
• G-LOC brake pads with about 1½ race weekends on them
Cockpit and safety:
• OMP HTE-R 400 seat, new for the 2026 season, with OMP mounts
• Seatbelt harness recertified in 2026
• Lifeline electronic fire suppression system
• Electronic master kill switch
• Cool suit system
• Wired for a helmet blower; the blower is included but currently out of the car
• MPI steering wheel and MPI quick release
• Wide interior rearview mirror with additional spot mirrors
• Motorola radio system with IMSA wiring harness and connection
Data and video:
• AiM MXS 1.3 dash and SmartyCam 3
• Logs air/fuel ratio, oil pressure, coolant temperature, intake air temperature, throttle position, brake pressure, and fuel pressure
• Fuel level is calibrated and displayed on the dash
• Tire pressure monitoring logs pressure and air temperature at all four corners
Spares package
When I built #132, I started with a complete, drivable 1999 Miata and kept the major components I removed. I mounted its complete front and rear assemblies onto the rolled Planet Miata chassis included with the sale. I’ve accumulated many additional parts as well, so there is a spare for nearly every major system and more than one spare for several of them.
The drivable donor had approximately 130,000 miles. Its engine and transmission were operating when removed.
Engine and drivetrain:
• Complete spare stock 1999 engine with its intake assembly and factory air box. Rossini dyno tested it, and Planet Miata reportedly measured 0% leakdown. It made what a healthy stock engine should make. Dyno information is available to serious buyers.
• Spare transmission. I drove the donor into the shop with it before disassembly.
• Spare driveshaft
• Factory 4.3 Torsen differential with street mileage and no race use. It remains installed in the rear assembly on the roller.
• Used OEM clutch that was working when removed
• Spare ESR exhaust
Assemblies mounted on the roller:
• Complete front subframe assembly, including factory suspension, control arms, steering and hub components, brake lines, calipers, and brakes
• Complete rear subframe assembly, including factory suspension, control arms, uprights and hubs, brake lines, calipers, brakes, and the 4.3 Torsen differential
Additional suspension and brake spares:
• One additional control arm for every position on the car, beyond the arms on the roller
• Additional pair of rear uprights with new bearings and wheel studs installed
• At least one complete spare pair of front hubs with wheel studs installed
• Two inner tie rods and two outer tie rod ends
• New spare rear brake rotors and a new set of rear G-LOC pads
• Spare brake lines
• Suspension fasteners and bolts, with at least a corner’s worth of hardware for each corner
• Penske damper parts, including bump stops and several used top hat bearings
The additional front hubs and rear uprights provide another set of wheel studs for all four corners, already installed.
Fuel, wiring, and data spares:
• Two spare fuel pumps, two pump socks/strainers, and one complete fuel pump assembly
• Complete factory power harness, engine harness, and injector harness from the donor
• Additional Dfuser Motorsports injector harness
• Factory fuses and relays, most of them new
• Miscellaneous AiM data patch cables
• Spare temperature and pressure sensors
Wheels and tires:
• One dry race wheel and tire set mounted on #132
• Two additional mounted dry sets
• One additional mounted rain set
• The used race tires have approximately four to six heat cycles. No sticker tires are included.
• Stock Miata wheels mounted on the rolled chassis so it can be moved. They hold air.
That’s four complete race wheel and tire sets total, including the set on #132, plus the stock wheels on the roller.
The roller is the former Planet Miata race car that rolled at Sebring. I kept it because the front portion of the chassis appears straight and could supply a front clip or other structural sections if I ever needed them. It carries the complete assemblies listed above and has other usable parts attached.
During the crash, an upper control arm struck and bent a rear frame rail. The rail was not crushed by a direct hit to the back of the car. I believe it could be repaired, but a buyer should inspect it and make their own assessment. The body panels are generally beat up. The cage could also have value to someone who wants to remove and reuse it.
I can provide photos, dyno information, and more detail on the car and spares to serious buyers. Asking $49,500 for everything together.
More Spec Miata for sale
See all Spec Miata
19NASA · Spec Miata
1994 Mazda MX-5 Spec Miata with XFactor engine, NASA points champion car and spares
$19,500
Cicero, NY3 hours ago
6NASA · Spec Miata
1999 Mazda MX-5 Spec Miata NB1, 6-point cage, clean AZ title
$14,000
Tucson, AZ3 weeks ago
10NASA · Spec Miata
2003 Mazda Miata Spec Miata race car, current NASA logbook
$20,500
Marietta, GA3 weeks ago
7SCCA · Spec Miata (SM)
1995 Spec Miata, Rossini engine
$10,000
Kelleys Island, OHlast month