Originally purchased January 2019 with 90,000 miles. Clean title. It was kept street legal until December 2024 when I built it to run in SPEC Corvette. In its current configuration it’s run in 6 NASA track day events at Carolina Motorsports Park, Summit Point, Road Atlanta and VIR. Current Mileage is 103,100 and is a beautiful car. Engine: Factory LS6 -Melling High pressure oil pump -Turn 1 power steering pump -Turn 1 rebuilt steering rack (no leaks) -New GM water pump 2024 -Katech tensioner -Oil catch can -Heads removed for valve job. At that time new head gaskets, new valve springs, new oil pressure sensor, new knock sensors and spark plugs were installed 2024 -Track Spec Radiator/Oil cooler and line kit -ATI Super Damper -Tick clutch master cylinder -Tick Remote clutch bleed valve -Monster S Series Clutch (0-550rwhp) installed 2023. -New alternator in 2023. -New battery in 2025 -Spec Corvette air intake mod -Kooks headers and x pipe with factory mufflers. Note: After adding the catch can set up and running an extra quart of oil, the engine does produce some blue smoke under deceleration from really high rpm downshifts in the braking zone. As soon as I get back to the throttle it instantly clears and produces great power. Suspension -Spec Corvette Penske Coilover package -All urethane bushings -Spec Corvette Sway bars front/rear. -Adjustable sway bar end links -AMT Locking Camber kit -Wheels: Square setup with all 18” factory Speedline wheels Brakes -Spec Corvette Wilwood package. First set of pads still installed with 1/2 pad left. -AAF Brake cooling ducts installed and plumbed to front intakes. -Factory rear brakes with Carbotech XP12 pads. Interior -Spec Corvette Tall Boy Cage. Professionally installed. -NRG Removable steering wheel (horn works) -NRG Steering column adapter with resister installed so airbag light does not illuminate. Speedcom intercom system -3 buttons on center panel control the trunk release, fuel door release and traction control selection. -Kirkey Seat -Simpson belts. -New windshield after cage was installed Items needed to comply with Spec corvette: -Install window net (parts included) -Install factory headers and exhaust (not included) Currently has Kooks Long Tube headers crossover pipe and modified stock titanium exhaust. Sounds fantastic. -Install battery disconnect switch (not included) -Install fire suppression system (not included) -Install rear spoiler (not included) -Tires Extras -4 extra Speedline 18” wheels. For track day enthusiasts just install your favorite tires and add gas. For Spec Corvette racers, the hard part is complete. Add the items listed above, your set-up and go have fun!